If you have a roll-up tonneau cover on your truck bed, you know how important the rubber seals are for keeping out water and debris. Over time, these seals can wear out or become damaged, allowing rain and dirt inside your truck bed. Replacing your tonneau cover’s rubber seals is an easy and inexpensive way to restore its protective function. But where exactly can you buy replacement rubber seals for roll-up tonneau covers?
What Are The Different Places To Buy Rubber Seals For Tonneau Covers?
When it’s time to replace the rubber seals on your roll-up tonneau cover, you have several options for where to purchase new seals. Here are some of the best places to buy replacement rubber seals for tonneau covers:
Can I Buy Rubber Seals For My Tonneau Cover On Amazon?
Amazon is one of the most convenient places to purchase rubber seals for tonneau covers. They offer a wide selection of seals for various makes and models of roll-up tonneau covers. Some things you can find on Amazon include:
- Universal seals – Amazon sells universal rubber seals that are designed to fit most standard roll-up tonneau covers. These can work if you’re not able to find an exact replacement seal for your specific cover brand.
- Brand name seals – Many brand name tonneau cover manufacturers sell their replacement seals directly on Amazon. This makes it easy to find the right seal for covers like BakFlip, Extang, Truxedo, and more.
- DIY seal kits – You can also purchase full rubber seal kits on Amazon that include rope seals, corner seals, and tape to re-seal the entire perimeter of your tonneau cover. These kits allow you to fully customize the seals to your cover.
The convenience of Amazon’s wide selection and fast shipping makes it one of the best options for purchasing tonneau cover seals. Just make sure to double check that any seal you buy is specifically designed for your truck bed size and tonneau cover brand.
Should I Buy Replacement Seals From An Auto Parts Store?
Your local auto parts stores, like AutoZone, O’Reilly Auto Parts, or Advance Auto Parts, are another option for finding rubber seals for tonneau covers. The availability of seals in local stores will depend on how extensive their inventory is.
The benefit of an auto parts store is you can usually get the seals immediately instead of waiting for shipping. You can also speak with knowledgeable store employees who may be able to help ensure you get the right seal for your cover.
One downside is that local stores may have a smaller selection than what you can find online. They primarily carry more common brands and truck bed sizes. But an auto parts store is still worth checking if you need a seal quickly or want an employee’s input.
Can I Order Tonneau Cover Seals Directly From The Manufacturer?
ordering replacement seals directly from your tonneau cover’s manufacturer is usually the best way to guarantee fit and compatibility. Most manufacturers sell replacement parts like seals for their covers.
Some tonneau brands that sell seals are:
- Bak Industries
- Pace Edwards
To find the seals for your cover, check the manufacturer’s website or give their customer service a call. Provide them with your cover name, truck bed size, and model year and they can send you the right replacement seals.
Direct from the manufacturer is often a bit more expensive than other options but you know you’re getting an exact fit OEM seal.
What About Buying Rubber Seals From An Online Truck Accessory Store?
There are many online retailers that specialize in truck accessories and parts, including replacement seals for tonneau covers. Some popular online truck accessory stores include:
- Truck Outfitters Plus
These retailers typically have large selections of tonneau cover seals for both common and obscure truck bed sizes and cover brands. Their websites make it easy to search for your specific cover and ensure fit.
The main advantage of buying seals from online truck accessory websites is their specialized inventory catered specifically to trucks. You also get access to customer reviews which can help choose the best seal for your cover.
How Do I Know What Size Rubber Seal I Need For My Tonneau Cover?
The most important factor in choosing replacement rubber seals for a tonneau cover is getting the proper size for your truck bed. Here are some tips for determining what size seals you need:
Measure Your Truck Bed Length And Width
The dimensions of your truck bed determine what size seals you need. Use a tape measure to measure the full length and width of the inside of your bed. Most beds are around 60-72 inches wide and from 73-97 inches long (for standard full-size truck beds). But take exact measurements of your specific truck to be sure.
Consult Your Owner’s Manual
Your truck or tonneau cover owner’s manual may provide the original seal measurements or part numbers. This can give you a starting point for finding the right replacement seals. If you don’t have the manuals, check the manufacturer websites which often provide size charts.
Reference Your Current Seals
A quick way to determine the size you need is to simply look at the seals currently on your cover. The length and thickness will give you an idea of what size to search for. Bring one of your seals with you to the store when shopping to easily match up new seals.
Consider Tailgate Seal Requirements
Make sure any seal kit you buy includes a tailgate seal. The tailgate seal prevents water from getting in the gap between the end of the cover and the closed tailgate. Getting the right one keeps your cargo protected.
By carefully measuring your bed, consulting size guides, and taking note of your current seals, you can determine the exact replacement rubber seals that will fit your roll-up tonneau cover.
What Type Of Material Should The Rubber Seals Be Made From?
Roll-up tonneau cover seals are typically made from vinyl, rubber, or foam materials. Here are some things to know about each seal material type:
- Made of durable, flexible vinyl
- Resist cracking from sun exposure
- Tend to be the most affordable option
- Provide decent protection from weather
- Can rub and squeak against the truck bed
- Usually made from EPDM or TPE rubber
- Withstand wear and tear over many years
- Hug truck bed rails tightly for good sealing
- More expensive but very durable
- Ensure smooth, quiet opening and closing
- Made from dense weather-stripping foam
- Compress to form a tight seal along the bed
- Tend to be thicker than other seal types
- Provide excellent insulation from outside air/water
- Can absorb moisture over time and degrade
Any of these materials can work well as long as you get high-quality seals designed to withstand the elements. But rubber seals tend to provide the best sealing performance and longevity.
What Are Some Tips For Installing New Rubber Seals?
Once you’ve purchased replacement seals for your tonneau cover, proper installation is key to ensuring they function correctly. Here are some useful tips for installing new seals:
Carefully Remove The Old Seals
Taking the old seals off is often the hardest part of the job. Use a flat pry tool to get underneath the seals and slowly work them off. Try to avoid tearing or ripping them. This will allow the new seals to adhere properly.
Completely Clean The Mounting Surfaces
Use rubbing alcohol to thoroughly clean the cover and bed rail surfaces where seals attach. Remove any old adhesive, dirt, or debris so the new seals stick tightly.
Measure Twice, Cut Once
Carefully measure the length you need to trim the seals to fit your bed. Leave an extra 1/2 inch on each end for adjustment. Only cut once you’re sure of the correct length.
Apply Adhesive Under The Seals
Most seals come with adhesive strips on the back. But adding extra adhesive provides maximum holding power. Use exterior-grade sealant under the seals, especially on the ends.
Take Time Pressing The Seals Into Place
Firmly press the seals onto the cover and bed rails, holding for 30-60 seconds in several spots to make sure they adhere. Take your time working the seals on for a tight fit.
Inspect The Seals After Installation
Operate the cover a few times once the seals are installed. Visually inspect the seals around the whole perimeter of the bed to ensure they aligned correctly with no gaps.
By following these tips, your new seals will create a water-tight barrier, protect your cargo, and stay securely attached to your roll-up tonneau cover.
Will Installing New Seals Be An Easy DIY Job?
Replacing the rubber seals on a roll-up tonneau cover is generally a very straightforward DIY project for a truck owner to tackle. Here are some things to consider:
Cost Of DIY vs Professional Installation
Buying seals and doing it yourself costs significantly less than paying for installation at a shop. DIY seals can run from $50-$100 while paying for install can cost over $200.
Plan on the DIY seal replacement job taking 1-3 hours your first time. After removing the old seals, cleaning the surfaces, and carefully installing the new seals, it’s not a quick project but very manageable.
Tools And Materials Needed
You’ll need rubbing alcohol, adhesive, a utility knife, pry tool, and measurements. No special tools required!
Mechanical Skill Level
This project requires no advanced skills. Just be patient, work slowly, and use proper measurements. Anyone comfortable with minor repairs and modifications can handle it.
Availability Of Installation Instructions
Many seal kits include detailed instructions. There are also several YouTube tutorials providing a step-by-step guide if you need assistance.
Overall, installing new rubber seals is one of the simpler DIY projects for roll-up tonneau covers. With minimal investment in tools and materials, and taking the time to do the job right, you can avoid paying for professional installation.
Will New Seals Improve The Performance Of My Tonneau Cover?
Replacing worn out, cracked, or degraded seals with fresh, new seals can definitely improve how well your roll-up tonneau cover functions. Here are some of the benefits new seals provide:
New seals will create a watertight barrier along your truck bed rails, keeping rain, snow, and dirt from getting into the truck bed. This keeps your cargo clean and dry.
Reduce Wind Noise
Cracked or loose seals allow air to enter the bed, creating wind noise at highway speeds. New seals prevent air penetration and make your cover quieter.
Tight, robust seals also improve security by preventing people from accessing the bed of your truck when the cover is closed.
Help The Cover Roll Smoother
Fresh seals reduce friction allowing the cover to glide easier when opening and closing. Broken seals can cause the cover to stick and bind.
Maintain Energy Efficiency
Seals prevent outside air from entering the bed, helping maintain temperature control in the bed. This keeps stored items cooler in summer and warmer in winter.
Replacing aged, damaged seals with new ones enhances almost every function of your roll-up tonneau cover. Keeping the seals in good shape improves performance for many years.
What Are Signs I May Need To Replace The Seals On My Truck Bed Cover?
To maximize the life of your tonneau cover and keep your truck bed protected, you’ll want to periodically inspect the seals. Here are some signs it may be time to replace the existing seals:
Visible Cracking Or Drying
If the seals appear cracked or dried out, they are breaking down from sun and weather exposure. Replacement seals will look supple and uniform.
Gaps Along The Sides
Gaps anywhere along the side seals provides an entry point for water. Damaged or misaligned seals that don’t meet tightly indicate a need for replacement.
Leaking Inside The Bed
If you open your cover and find standing water or moisture inside, leaking seals are almost always the culprit. New seals will stop leaks.
Increased Wind Noise
Wind whistling through worn seals means they are no longer effectively sealing out air flow. Fresh seals will restore a quiet cover.
The Cover Doesn’t Close Smoothly
If the cover sticks, binds, or doesn’t roll smoothly, worn seals dragging across the bed could be the issue.
Periodically checking for these warning signs allows you to replace seals before major leaks or damage occur. Catching problems early keeps your tonneau cover working like new.
Will I Need Any Special Tools To Install The New Seals?
Replacing most roll-up tonneau cover seals is a straightforward process that doesn’t require many special tools. Here are the basic items needed:
- Utility knife or razor blade
- Pry tool
- Tape measure
- Isopropyl alcohol
- Adhesive sealant (if your seals don’t have pre-applied tape)
- Clamps (helpful but not necessary)
Many seal kits also include any alcohol pads or adhesive you’ll need. And always check your owner’s manual because some covers may require specific tools.
But in most cases, just using household items like an old credit card as a pry tool and being patient during installation is all that’s required. It’s an easy DIY job that doesn’t need expensive specialty tools.
What Are Some Tips For Making My New Seals Last Longer?
To maximize the lifespan of your new tonneau cover seals, here are some helpful maintenance tips:
Inspect Seals Periodically
Check the seals around the cover every few months for any gaps, tears, or signs of wear. Catching minor issues early prevents leaks.
Keep The Seals Clean
Use soap and water to wash dirt and debris off the seals. Buildup can cause abrasion and damage to the seals.
Avoid Overloading The Cover
Carrying extremely heavy cargo or improperly distributing the load stresses the cover and seals. Follow your owner’s manual capacity guidelines.
Lube The Hinges
Keeping the cover’s hinges lubricated allows smooth opening and closing, reducing grinding on the seals.
Park In The Shade When Possible
Constant sun exposure ages seals faster. Limiting light exposure extends lifespan.
With proper care and maintenance, your new seals should last several years or more. But be sure to re-inspect them 1-2 times per year.
Final Thoughts On Buying Rubber Seals For Roll-Up Tonneau Covers
Replacing the rubber seals on your roll-up tonneau cover is cheap and easy truck bed protection maintenance. Take measurements of your existing seals and bed length to find accurate replacements online, at auto parts stores, or directly through the manufacturer.
DIY installation just takes some time and patience. Brand new seals prevent leaks, reduce noise, and improve security. Periodically inspect your seals and replace them at the first sign of damage to get the most value from your truck bed cover.