Where Can I Buy Rubber Seals For My Bakflip Tonneau Cover?

If you own a truck with a Bakflip tonneau cover, you know how important it is to keep the rubber seals in good condition. The seals help keep your truck bed protected from the elements.

Over time, seals can become cracked, torn or misshapen from use and exposure to the sun. Replacing worn seals on your Bakflip cover ensures it continues to function properly and look its best. But where can you find the right replacement seals for your specific Bakflip model?

What Are Tonneau Cover Seals?

Tonneau cover seals play a vital role in creating a tight weatherproof seal around your truck bed. There are several types of seals found on most folding and retractable Bakflip models:

• Side Seals – These run vertically along the sides of the cover to seal against the bed rail. Side seals prevent water from entering between the cover and rail.
• Rail Seals – Rail seals sit on top of the front and back rails to seal the cover against the rail surface.
• Hinge Seals – Hinge seals close off the gaps where folding cover panels meet. This prevents water intrusion through the hinge gaps.
• Perimeter Seals – A perimeter seal runs around the outer edge of the cover to seal against the truck bed. It helps keep out dust and debris.
• Drain Tube Seals – Drain tubes allow water to exit the cover. Seals around the tubes prevent leaks.

keeping your seals in good shape ensures maximum weather protection for your truck bed.

Where to Buy Bakflip Tonneau Cover Seals

Finding the correct seals for your Bakflip means first determining which Bakflip model you have. Here are some of the best places to purchase Bakflip seals for most models:

1. RealTruck

RealTruck is an online retailer of truck parts and accessories. They stock a wide range of seals for Bakflip covers, including:

• Original equipment seals for BakFlip models like the G2, HD, MX4, F1, and FiberMax.
• Replacement vinyl seals for the perimeter, sides, rails, hinges, and drain tubes.
• Custom-fit seals sold individually or as full seal kits.

RealTruck seals are direct replacements for your OEM seals. Their step-by-step instructions help you install them correctly.

2. BAK Industries

As the manufacturer of Bakflip covers, BAK Industries offers all the original seals that came with your cover. Check their website or contact BAK customer service to find:

• Factory seals for current and older Bakflip models.
• Bulk quantities of seals sold individually or in seal kits.
• Seals in original vinyl, rubber, or brush material.
• Installation instructions provided with seals.

Purchasing directly from BAK ensures you get the right seals made specifically for your cover.

3. etrailer.com

The online retailer etrailer.com stocks a large inventory of aftermarket and custom seals for Bakflip covers, such as:

• Replacement seals for the MX4, F1, FiberMax, G2, and older models.
• Seals made of vinyl, rubber, foam, and brush material.
• Bulk quantities of seals sold individually and in complete seal kits.
• Helpful DIY seal installation videos for many Bakflip models.

etrailer focuses on truck accessories, so they’re a good source for Bakflip seals.

4. Amazon

Searching on Amazon yields many brand name and aftermarket seals for Bakflip covers, including:

• Vinyl seals from vendors like Tyger and Great Day.
• Rubber seals from Rusco, Seal King, and Edge Series.
• Replacement hinge seals, side seals, rail seals and perimeter seals.
• Complete seal kits or seals sold individually.

Double check that Amazon seller seals are compatible with your specific Bakflip model before ordering.

5. RicksProTruck.com

This site offers custom-fit replacement seals for most Bakflip models such as:

• G2, MX4, HD, F1, and FiberMax seals.
• Bulk seal kits or seals sold individually.
• Easy-to-install seals made to factory specifications.

RicksProTruck provides helpful diagrams of where seals install on your cover too.

Shopping online at retailers of truck parts and accessories will yield the best selection of Bakflip seals.

How to Measure for Replacement Seals

To get the right seals for your Bakflip cover, some precise measurements will be needed:

• Side seals – Measure the length of your cover’s side rails. Side seals are typically sold by the foot.
• Rail seals – Measure across the cover width at the front and back rails. Buy seals according to your cover width.
• Hinge seals – Count the exact number of hinge gaps on your cover. Purchase enough hinge seal strips to match.
• Perimeter seals – Use a fabric measuring tape to run around the outside edge of your cover for the total perimeter length.
• Drain tube seals – Count the number of drain grommets on your cover to know how many tube seals you need.

Measuring carefully before ordering ensures the new seals will fit correctly on your Bakflip model. Check the seller’s website for any measuring guides or diagrams too.

How Difficult is it to Replace the Seals?

Installing new seals on your Bakflip cover is usually a straightforward process:

• No cover removal needed – The seals can be replaced with the cover still installed on your truck.
• Cleaning – Use soap and water to thoroughly clean the cover and rail surfaces where new seals will adhere.
• Removal – Slowly peel off the old seals. A plastic pry tool helps get under the seals without scratching the cover.
• Goop hand cleaner works well for breaking the seal adhesive bond too.
• Installation – Apply the new seals by sticking them into place along the cover’s side rails, hinges, perimeter edge and drain tubes. Take care to position them correctly.
• Press the seals firmly to adhere them to the cover surface.
• Weather stripping adhesive can be used for extra holding power if needed in high friction spots.

With a little time and effort, you can successfully replace the seals on your Bakflip. Watching online installation videos is helpful for new seal placement. Adding fresh seals restores your cover’s ability to keep the elements out of your truck bed.

Where to Get Help Replacing Seals

If you don’t feel up to replacing the seals on your Bakflip yourself, you can get professional assistance from:

• Mobile installers – Many truck accessory companies offer on-site installation services. Mobile techs will come to your home or workplace to replace seals.
• RV service centers – RV dealerships and service centers work on everything from truck camper shells to tonneau covers. Their experienced staff can replace seals for you.
• Truck performance shops – Many shops specializing in truck accessories, lighting, wheels, lifts and more also provide installation services like seal replacement.
• Vehicle detailing shops – Some auto detailing businesses offer small accessory installations including swapping out tonneau seals.

Getting quotes from a few local businesses ensures you get a competitive price on having your Bakflip seals professionally replaced.

Restore Weather Protection with New Seals

Rubber seals are essential components on any Bakflip tonneau cover. When your seals wear out, it’s important to replace them right away. Worn out seals allow dust, debris and moisture into your truck bed, damaging your gear.

Luckily, you can find replacement seals online and at truck accessory retailers. With some careful measurements and proper installation, you can easily install new seals on your Bakflip cover.

Or have a truck service shop do it for you. Fresh seals mean your cover goes back to providing maximum weather protection for your truck bed cargo and equipment.